University calendar

"Design and Development of a 14-Degree-of-Freedom Electromechanical Prosthetic Hand with EMG-Based Controls and Magnetic Position Feedback"

Thursday, December 17, 2026 at 11:00am to 1:00pm

SENG-110
Rachel White
508-999-8232
rwhite@umassd.edu
https://teams.microsoft.com/meet/2276907993813408?p=DuJffJFMvXKBpjNDlu

ADVISOR:

Dr. Kihan Park, Associate Professor, Department of Mechanical Engineering, UMass Dartmouth

COMMITTEE MEMBERS:

Dr. Dapeng Li, Professional Technician II, Department of Biomedical Engineering, UMass Dartmouth

Dr. Caiwei Shen, Associate Professor, Department of Mechanical Engineering, UMass Dartmouth

ABSTRACT:

Upper-limb prosthetic devices provide essential functional support for individuals with limb loss, a difficult disability effecting millions of people worldwide. However, achieving coordinated, precise, and independently controlled finger articulation remains a significant engineering challenge. This project focuses on the design and development of a multi-degree-of-freedom electromechanical prosthetic hand capable of independently actuating individual finger joints through an integrated motorized transmission and position-feedback architecture.

The proposed design incorporates 14 independently actuated joints across five digits, utilizing compact DC motors and bevel gear assemblies to generate rotational motion at each joint. The mechanical assembly was modeled and developed in SolidWorks. In this phase, the emphasis was on component integration, compact packaging, and joint articulation within the hand structure. Angular position is measured using magnetic rotary encoders, which detect the rotational orientation of magnets mounted directly to the corresponding joint drive shafts. Trial prints for testing were made using Bambu Lab's H2D printer and PLA, while final printing was completed with ABS like resin.

The control architecture utilizes an Arduino Mega microcontroller to interpret electromyographic (EMG) input signals and generate pulse-width-modulated (PWM) commands to individual motor controllers. Simulated EMG signals were developed as square waves to begin testing procedures. Encoder feedback provides real-time joint-position information, enabling closed-loop motor control and coordinated articulation of individual digits. This architecture is intended to support programmable grasp patterns and differentiated finger movements. For this project, the main focus was on completing an 'OK' sign and a 'Pinch' type finger motion.

This project establishes an integrated mechanical and electronic framework for an independently actuated prosthetic hand, demonstrating an approach to combining compact electromechanical transmissions, magnetic position sensing, and EMG-based control into a modular upper-limb prosthetic platform. The goal is to give autonomy and normalcy back to those affected by upper limb loss.

Meeting ID: 227 690 799 381 340 8   Passcode: 6VD3H4Xc

Back to top of page